Cyclades AlterPath BladeManager Manuale delle Istruzioni Scaricare il pdf (Pagina 60)

46 MergePoint 5224/5240 Service Processor Manager Installer and Administrator Guide

Figure 4.1: Recommended Target Device Configuration

Preparing an addressing scheme

Before configuring any target devices, the administrator must plan and implement an IP addressing

scheme that reflects the needs of the organization.

As illustrated in Figure 4.1, the dedicated Ethernet ports on SPs and on other supported types of

devices are connected to the private Ethernet ports. Each target device’s dedicated Ethernet port

needs an internal IP address assigned on the SP manager and configured for the interface. By

implementing an addressing scheme, the administrator creates a pool of internal addresses that can

be assigned to the devices’ dedicated Ethernet ports and configured for the target device on the SP

manager side.

While implementing the addressing scheme, the administrator assigns to the SP manager one or

more private IP addresses in addition to the SP manager’s public IP address. The SP manager’s

private IP address or addresses, which are referred to in the user interface as appliance-side

addresses) are used by the following:

• Target Devices when talking to the private Ethernet ports of the SP manager

• Users who make PPTP or IPSec VPN connections to enable native IP access

Figure 4.2 shows some example IP addresses assigned.

Internet

eth0 (Primary Ethernet Port)

SP Ethernet Port

MergePoint 5224/5240 SP Manager

Server Ethernet Port

SP Ethernet Port

Production

Network

Private

Network

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 239 240

Nessun commento

Cyclades AlterPath BladeManager Manuale delle Istruzioni Pagina 60